fbpx Skip to content

Pressure Overflow Filler

The Pressure Overflow Filler from Inline Packaging Systems is built on the fill-to-level principle. This is ideal for a wide variety of product as well as container types. Excess product flows through the overflow vent back to the tank once the cycle is finished and the filling head disengages.
Rinsers and Cappers can be added in line.

For Pressure Overflow Filler:

  • Fill-to-level principle
  • Model OF Pressure Overflow Filler delivers an abundance of flowable liquid into the container until it reaches an adjustable fill height
  • Excess liquid then moves through the overflow vent back into a tank until the time cycle is complete and the filling head retracts
  • Ideal filling style for a wide variety of product and container types
  • Starts with four nozzles and is expandable up to 12 316 SS mechanical filling nozzles all mounted for thorough adjustment to bottle sizes ranging up to 3½" diameter
  • Pneumatic escapement gates ensure the containers are aligned while the neck guides control the container openings under the filling nozzles
  • Automatic level control using mechanical float allow the product level (therefore fill time) to be closely controlled in the product as well as tank
  • Stainless drip tray establishes clean transitions between containers 
  • Drip tray under the conveyor assists in spill control
  • 6" touchscreen ensures fine tuning of all manual and automatic functions, including saved recipes for various packages and supports cleaning protocol through full manual control of each device
  • 10" centralized stainless steel main conveyor is included with variable speed control and super-clean conveyor ends for quick and simple transitions 

For the Pressure Overflow Filler:

  • Fully adjustable escapement gates with counting photo-eye for container detection
  • Fully adjustable 316 SS filling nozzles
  • Integrated drip tray and neck centering guides
  • 50 gallon product tank (may be sized differently)
  • Centralized main conveyor motor allows configurable conveyor with clean transitions
  • Fully stainless steel frame
  • 6" touchscreen interface
  • Speeds to 60 cpm based on product and size
  • Integrated container rinser can be added to the infeed end to wash out containers
  • Rinser is controlled with the touchscreen and works together with the filler
  • Integrated Air Cleaner can be added to the infeed end to wash out bottles
  • Cleaner utilizes ionized air and is controlled within the touchscreen and works together with the filler
  • Modular built-in ends bolt into the main filler conveyor for precise transitions in bottle feeding
  • 3A and sanitary upgrades are available
Pressure Overflow Filler from Inline Packaging for non carbonated filling
Pressure Overflow Filler from Inline Packaging
Technical Data Pressure Overflow Fillers

Pressure Overflow Filler

Conveyor Width


Conveyor Height

36" standard (+/-2") can be varied per specific application

Conveyor Length


Overall Machine Height


Overall Machine Length


Overall Machine Weight 

900 lbs

Power Requirements

120 volt AC, 60 cycle, 10AMP

Compressed Air

65 psi @ 3-4 cfm

Higher Yields

“We certainly noticed that the yields are higher, getting more juice from the same amount of fruit. And when you have more fruit to press, the whole process will be a lot more efficient because when you are setting up and breaking down for a small amount it’s a little more time-consuming but if you’re going to run more fruit, you’re still going to have the same amount of set up and clean up time.” -Ron Bixby of Little Apple CideryRead More…

© 2022 Juicing Dot Systems Inc.