fbpx Skip to content

Rinser

Our RSC Rinser is not only easy but an economical way to rinse or air clean bottles prior to filling. The Rinser is set up before the filler and is meant to run automatically. This allows it to feed the filler a supply of clean bottles by counting infeed containers. Once a full group is present, the bottles are clamped and then inverted over a collection tray. A pump (or straight factory water connection) then injects water up onto the base of the bottle. A variable time delay allows for you to adjust how long the rinse time is as well as how long the drain time is. Alternately, a sanitizing solution - or even the product itself - can be utilized to rinse and recirculated into a simple 5-gallon bucket. Once the rinse cycle is completed, the bottles are released and discharged. They are then ready for the filling process. A backup eye is part of the standard design to prevent the rinser from releasing bottles until the conveyor is open and ready. This allows it to run at the speed of the filler. A variety of sizes can be handled from a single manifold, and dedicated maifolds are inexpensive and grant quick changeovers between packages.

  • Advantages
  • Function
  • Design
  • The enclosure contains a 6 inch touchscreen and full controls
  • The touchscreen allows for adjustment of all timers and distaces for fine tuning of your operation
  • Intuitive tags to allow operators to understand each function of the rinser
  • Backup eye prevents bottle necks at the push off bar by preventing the release of bottles from the rinser until the backup lessens up
  • Backup eye on the Labeler stops the Labeler once the bottles backup from the Bottle Rinser
  • Designed so the machine runs faster than the bottler but waits on the bottler to process rows
  • Once processed, it supplies new rows as needed

Easy and economical solution to rinse or air clean bottles prior to filling. Automatic procedure saving you time. Adjustable time delays allow for the fine tuning of rinse time as well as drain time. 

  • Up to 8 bottles per group
  • Required 100V electrical and 1/4" quick disconnect for the air input
  • Recirculation of water requires a 5 gallon bucket
  • Rinser is supplied with a pump
  • Adjustable for a variety of sizes
  • The Rinser can also use city tap water and run it through a carbon filter for purification
  • Rinser bolts into the end of an In-Line Labeler and uses the same conveyor throughout
  • Alternatively, it can be attached to an In-Line Filler
Testimonials
Process of elimination

“It was a really helpful process of elimination by having me check different things when they were as they should be, we moved on to different things it could be,” -Chris Gowan of Embark CiderRead More…

© 2021 Juicing Dot Systems Inc.